The Turbomachinery Laboratory will further its global impact this month during the Turbomachinery Technical Conference & Exposition (Turbo Expo) in Phoenix, Arizona.
The conference, presented by the American Society of Mechanical Engineers (ASME) International Gas Turbine Institute, is set for June 17-21. Experts from around the world will come together to share the latest academic findings in turbine technology, research, development and application.
Turbo Lab faculty and students will present or host more than 30 technical papers and sessions, and Turbo Lab staff will represent the Lab in the expo, booth 323.
Turbo Lab papers submitted to the conference are often also accepted to the ASME Journal of Engineering for Gas Turbines and Power. Papers undergo a stringent review process in order to be journal-ready. They must be interesting, original, innovative and of significant relevance to the gas turbine industry, according to ASME evaluation guidelines.
“It’s a big honor to get accepted to journal,” said Dr. Eric Petersen, Turbo Lab director. “This is common for the Turbo Lab. It speaks to the high-quality research, and the high-quality students and faculty behind the research.”
Dr. Luis San Andrés, Mast-Childs Chair professor, Mr. Bonjin Koo, and Dr. Sunghwa Jeung, former students in the Turbo Lab, will receive an ASME Best Paper Award from the Structures and Dynamics Committee for “Experimental Force Coefficients for Two Sealed Ends Squeeze Film Dampers (Piston Rings and O-rings): An Assessment of Their Similarities and Differences.”
The Best Paper Award is given to papers that rank in the top one percent of all conference submissions. They are high-quality, original and contribute uniquely to the science of engineering.
See below for details on Turbo Lab participation in the 2019 Turbo Expo.
Session Leadership
Dr. Adolfo Delgado
Chair | Structures & Dynamics: Bearing & Seal Dynamics – Seals 2
When: Tuesday, June 18 @ 8:00 – 9:30 AM
Co-Chair | Structures & Dynamics: Bearing & Seal Dynamics – Seals 4
When: Wednesday, June 19 @ @ 2:00 – 3:30 PM
Chair | Structures & Dynamics: Rotordynamics – Bearings and seals
When: Thursday, June 20 @ @ 4:00 – 5:30 PM
Dr. Lesley Wright
Vanguard Chair | Heat Transfer: General Experimental Heat Transfer
Chair | Heat Transfer: Experimental Film Cooling – Experimental Film Cooling IV
When: Tuesday, June 18 @ 8:00 – 9:30 AM
Dr. Jing Yang
Chair | Structures & Dynamics: Bearing & Seal Dynamics – Seals 6
When: Friday, June 21 @ 8:00 – 10:00 AM
Student Authors
Sulaiman Alturaifi
“Autoignition Study of ” “Gas-to-Liquid” ” Fischer-Tropsch Jet Fuels”
When: Wednesday, June 19 @ 2:00 – 3:30 PM
Paper #: 90270
Tatyana Atherley
“Autoignition Study of ” “Gas-to-Liquid” ” Fischer-Tropsch Jet Fuels”
When: Tuesday, June 19 @ 2:00 – 3:30 PM
Paper #: 90270
Forrest Carpenter
Reduced-Order Model of Unsteady Flows in a Turbomachinery Fan Modeled Using a Novel Proper Orthogonal Decomposition
When: Monday, June 17 @ 8:00 – 10:00 AM
Paper #: 90323
Andrew Chen
Detailed Heat Transfer Coefficient Measurements on a Scaled Realistic Turbine Blade Internal Cooling System
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper #: 90097
Effect of 45-Deg Rib Orientations on Heat Transfer in a Rotating Two-Pass Channel With Aspect Ratio From 4:1 to 2:1
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper #: 90099
Sean Cooper
CH Kinetics Measurements and Their Importance for Modeling Prompt NOx Formation in Gas Turbines
When: Tuesday, June 18 @ 2:00 – 3:30 PM
Paper #: 90569
Anthony Hresko
Experimental Investigation of Morton Effect (Thermally Induced Rotor Instability)
When: Tuesday, June 18 @ 12:15 – 2:00 PM
Paper #: 92281
Xiao Kang
Simulation, Test and Mitigation of 1/2X Forward Whirl Following Rotor Drop Onto Auxiliary Bearings
When: Tuesday, June 18 @ 2:00 – 3:30 PM
Paper #: 91645
Charles Keesee
Effect of Steam Dilution on Laminar Flame Speeds of Syngas Fuel Blends at Elevated Pressures and Temperatures
When: Monday, June 17 @ 2:00 PM – 3:30 PM
Paper #: 90570
Laminar Flame Speed Experiments of Alternative Liquid Fuels
When: Wednesday, June 19 @ 4:00 – 5:30 PM
Paper #: 90475
Bonjin Koo
A Model and Experimental Verification of the Dynamic Forced Performance of a Tightly Sealed Squeeze Film Damper Supplied with a Bubbly Mixture
When: Tuesday, June 18 @ 4:00 – 5:30 PM
Paper #: 90330
Rasool Koosha
Effect of Pad and Liner Material Properties on the Static Load Performance of a Tilting Pad Thrust Bearing
When: Thursday, June 20 @ 8:00 – 10:00 AM
Paper #: 90231
Elizabeth Krath
Reduced-Order Model of Unsteady Flows in a Turbomachinery Fan Modeled Using a Novel Proper Orthogonal Decomposition
When: Monday, June 17 @ 8:00 – 10:00 AM
Paper #: 90323
Michael Krejci
Effect of Steam Dilution on Laminar Flame Speeds of Syngas Fuel Blends at Elevated Pressures and Temperatures
When: Monday, June 17 @ 2:00 – 3:30 PM
Paper #: 90570
Victor Leon
Validation of a New Turbulent Flame Speed Facility for the Study of Gas Turbine Fuel Blends at Elevated Pressure
When: Tuesday, June 18 @ 4:00 – 5:30 PM
Paper #: 90394
Xueliang Lu
Leakage and Dynamic Force Coefficients of a Pocket Damper Seal Operating Under a Wet Gas Condition: Tests vs. Predictions
When: Monday, June 17 @ 8:00 – 10:00 AM
Paper #: 90331
Leakage and Force Coefficients of a Grooved Wet (Bubbly Liquid) Seal for Multiphase Pumps and Comparisons With Prior Test Results for a Three Wave Seal
When: Wednesday, June 19 @ 2:00 – 3:30 PM
Paper #: 90254
Anibal Morones
Validation of a New Turbulent Flame Speed Facility for the Study of Gas Turbine Fuel Blends at Elevated Pressure
When: Tuesday, June 18 @ 400 – 5:30 PM
Paper #: 90394
Clayton Mulvihill
CH Kinetics Measurements and Their Importance for Modeling Prompt NOx Formation in Gas Turbines
When: Tuesday, June 18 @ 2:00 – 3:30 PM
Paper #: 90569
Pradeep Parajuli
High-Speed Spectrally Resolved Imaging Studies of Spherically Expanding Natural Gas Flames Under Gas Turbine Operating Conditions
When: Wednesday, June 19 @ 4:00 – 5:30 PM
Paper #: 91752
Tyler Paschal
An Investigation of Laminar Flame Speed of CH4-O2-CO2 Mixtures
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper #: 91392
Combustion Characterization of a Fuel-Flexible Piloted Liquid-Spray Flame Apparatus Using Advanced Laser Diagnostics
When: Friday, June 21 @ 8:00 – 10:00 AM
Paper #: 91971
Sankaranarayanan Ravi
Effect of Steam Dilution on Laminar Flame Speeds of Syngas Fuel Blends at Elevated Pressures and Temperatures
When: Monday, June 17 @ 2:00 – 3:30 PM
Paper #: 90570
Kyle Ruehle
Validation of a New Turbulent Flame Speed Facility for the Study of Gas Turbine Fuel Blends at Elevated Pressure
When: Tuesday, June 18 @ 4:00 – 5:30 PM
Paper #: 90394
Izzet Sahin
Effect of 45-Deg Rib Orientations on Heat Transfer in a Rotating Two-Pass Channel With Aspect Ratio From 4:1 to 2:1
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper #: 90099
Chao-Cheng Shiau
Detailed Heat Transfer Coefficient Measurements on a Scaled Realistic Turbine Blade Internal Cooling System
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper #: 90097
Effect of 45-Deg Rib Orientations on Heat Transfer in a Rotating Two-Pass Channel With Aspect Ratio From 4:1 to 2:1
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper #: 90099
Mattias Turner
An Investigation of Laminar Flame Speed of CH4-O2-CO2 Mixtures
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper #: 91392
Validation of a New Turbulent Flame Speed Facility for the Study of Gas Turbine Fuel Blends at Elevated Pressure
When: Tuesday, June 18 @ 4:00 PM – 5:30 PM
Paper #: 90394
High-Speed Spectrally Resolved Imaging Studies of Spherically Expanding Natural Gas Flames Under Gas Turbine Operating Conditions
When: Wednesday, June 19 @ 4:00 – 5:30 PM
Paper #: 91752
Andrew Vissotski
Effect of Steam Dilution on Laminar Flame Speeds of Syngas Fuel Blends at Elevated Pressures and Temperatures
When: Monday, June 17 @ 2:00 – 3:30 PM
Paper #: 90570
Yejun Wang
Combustion Characterization of a Fuel-Flexible Piloted Liquid-Spray Flame Apparatus Using Advanced Laser Diagnostics
When: Friday, June 21 @ 8:00 – 10:00 AM
Paper #: 91971
Tingcheng Wu
Leakage and Force Coefficients of a Grooved Wet (Bubbly Liquid) Seal for Multiphase Pumps and Comparisons With Prior Test Results for a Three Wave Seal
When: Wednesday, June 19 @ 2:00 – 3:30 PM
Paper #: 90254
Pump Grooved Seals: A CFD Approach to Improve Bulk-Flow Model Predictions
When: Wednesday, June 19 @ 4:00 – 5:30 PM
Paper #: 90499
Leakage and Cavity Pressures in an Interlocking Labyrinth Gas Seal: Measurements vs. Predictions
When: Wednesday, June 19 @ 4:00 – 5:30 PM
Paper #: 91507
Dr. Jing Yang
Leakage and Dynamic Force Coefficients of a Pocket Damper Seal Operating Under a Wet Gas Condition: Tests vs. Predictions
When: Monday, June 17 @ 8:00 – 10:00 AM
Paper #: 90331
Cynthia Zhang
Leakage and Cavity Pressures in an Interlocking Labyrinth Gas Seal: Measurements vs. Predictions
When: Wednesday, June 19 @ 4:00 – 5:30 PM
Paper #: 91507
Faculty Authors
Dr. Dara Childs (Retired)
Preswirl and Mixed-Flow (Mainly-Liquid) Effects on Rotordynamic Performance of a Long (L/D=0.75) Smooth Seal
When: Tuesday, June 18 @ 8:00 – 9:30 AM
Paper # 90004
Comparison of a Liquid Annular Seal for Pump Applications With and Without a Swirl Brake
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper # 90113
A Study on the Leakage and Rotordynamic Coefficients of a Long-Smooth Seal With Laminar-Two-Phase, Mainly-Oil Mixtures
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper # 91824
A Study for Rotordynamic and Leakage Characteristics of a Long-Honeycomb Seal With Two-Phase, Mainly Air Mixtures
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper # 91831
Static Stiffness Measurements for a Thrust Collar Used in an Integrally Geared Compressor
When: Thursday, June 20 @ 10:15 AM – 12:15 PM
Paper # 90488
Dr. Paul Cizmas
Reduced-Order Model of Unsteady Flows in a Turbomachinery Fan Modeled Using a Novel Proper Orthogonal Decomposition
When: Monday, June 17 @ 8:00 AM -10:00 AM
Paper #: 90323
Dr. Adolfo Delgado
Static Stiffness Measurements for a Thrust Collar Used in an Integrally Geared Compressor
When: Thursday, June 20 @ 10:15 AM -12:15 PM
Paper # 90488
Dr. Je-Chin Han
Detailed Heat Transfer Coefficient Measurements on a Scaled Realistic Turbine Blade Internal Cooling System
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper #: 90097
Effect of 45-Deg Rib Orientations on Heat Transfer in a Rotating Two-Pass Channel With Aspect Ratio From 4:1 to 2:1
fhfghfghfhfgh
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper #: 90099
Dr. Waruna Kulatilaka
An Investigation of Laminar Flame Speed of CH4-O2-CO2 Mixtures
When: Tuesday, June 18 @ 11:15 AM – 12:45 PM
Paper #: 91392
High-Speed Spectrally Resolved Imaging Studies of Spherically Expanding Natural Gas Flames Under Gas Turbine Operating Conditions
fhfghfghfhfgh
When: Wednesday, June 19 @ 4:00 – 5:30 PM
Paper #: 91752
Combustion Characterization of a Fuel-Flexible Piloted Liquid-Spray Flame Apparatus Using Advanced Laser Diagnostics
fhfghfghfhfgh
When: Friday, June 21 @ 8:00 – 10:00 AM
Paper #: 91971
Dr. Olivier Mathieu
CH Kinetics Measurements and Their Importance for Modeling Prompt NOx Formation in Gas Turbines
When: Tuesday, June 18 @ 2:00 – 3:30 PM
Paper #: 90569
“Autoignition Study of” “Gas-to-Liquid” “Fischer-Tropsch Jet Fuels”
fhfghfghfhfgh
When: Wednesday, June 19 @ 2:00 – 3:30 PM
Paper #: 90270
Dr. Alan Palazzolo
Experimental Investigation of Morton Effect (Thermally Induced Rotor Instability)
When: Tuesday, June 18 @ 12:15 – 2:00 PM
Paper #: 92281
Simulation, Test and Mitigation of 1/2X Forward Whirl Following Rotor Drop Onto Auxiliary Bearings
fhfghfghfhfgh
When: Tuesday, June 18 @ 2:00 – 3:30 PM
Paper #: 91645
High Temperature Magnetic Thrust Bearing: Theory and Experiment
fhfghfghfhfgh
When: Thursday, June 20 @ 4:00 – 5:30 PM
Paper #: 91544
Dr. Eric L. Petersen
Effect of Steam Dilution on Laminar Flame Speeds of Syngas Fuel Blends at Elevated Pressures and Temperatures
When: Monday, June 17 @ 2:00 PM – 3:00 PM
Paper #: 90570
Carbon Monoxide Emission Measurements From a Supercritical CO2 Combustor Rig Using a Mid-Infrared Laser Absorption Diagnostic
When: Monday, June 17 @ 4:00 – 5:30 PM
Paper #: 91779
An Investigation of Laminar Flame Speed of CH4-O2-CO2 Mixtures
When: Tuesday, June 18 @ 11:15 AM -12:45 PM
Paper #: 91392
CH Kinetics Measurements and Their Importance for Modeling Prompt NOx Formation in Gas Turbines
When: Tuesday, June 18 @ 2:00 – 3:00 PM
Paper #: 90569
Validation of a New Turbulent Flame Speed Facility for the Study of Gas Turbine Fuel Blends at Elevated Pressure
When: Tuesday, June 18 @ 4:00 – 5:00 PM
Paper #: 90394
“Autoignition Study of” “Gas-to-Liquid” “Fischer-Tropsch Jet Fuels”
When: Wednesday, June 19 @ 2:00 – 3:30 PM
Paper #: 90270
Laminar Flame Speed Experiments of Alternative Liquid Fuels
When: Wednesday, June 19 @ 4:00 – 5:30 PM
Paper #: 90475
High-Speed Spectrally Resolved Imaging Studies of Spherically Expanding Natural Gas Flames Under Gas Turbine Operating Conditions
When: Wednesday, June 19 @ 4:00 – 5:30 PM
Paper #: 91751
Dr. Luis San Andres
Leakage and Dynamic Force Coefficients of a Pocket Damper Seal Operating Under a Wet Gas Condition: Tests vs. Predictions
When: Monday, June 17 @ 8:00 – 10:00 AM
Paper #: 90331
Model and Experimental Verification of the Dynamic Forced Performance of a Tightly Sealed Squeeze Film Damper Supplied With a Bubbly Mixture
When: Tuesday, June 18 @ 4:00 – 5:30 PM
Paper #: 90330
Leakage and Force Coefficients of a Grooved Wet (Bubbly Liquid) Seal for Multiphase Pumps and Comparisons With Prior Test Results for a Three Wave Seal
When: Wednesday, June 19 @ 2:00 – 3:00 PM
Paper #: 90254
Pump Grooved Seals: A CFD Approach to Improve Bulk-Flow Model Predictions
When: Wednesday, June 19 @ 4:00 – 5:00 PM
Paper #: 90499
Leakage and Cavity Pressures in an Interlocking Labyrinth Gas Seal: Measurements vs. Predictions
When: Wednesday, June 19 @ 4:00 – 5:30 PM
Paper #: 91507
Effect of Pad and Liner Material Properties on the Static Load Performance of a Tilting Pad Thrust Bearing
When: Thursday, June 20 @ 8:00 – 10:00 AM
Paper #: 90231
Dr. Lesley Wright
Numerical Study on Cooling Characteristics of Double-Row Cylindrical Holes on Upstream Endwall
When: Thursday, June 20 @ 10:15 AM – 12:15 PM
Paper # 91069
Influence of Hole Inlet Geometry on the Film Cooling Effectiveness From Shaped Film Cooling Holes
dgdfgdgdgdgdgddffff
When: Thursday, June 20 @ 2:00 – 3:30 PM
Paper #: 92057
Thermal Characterization of a Turbulent Free Jet With Planar Laser Induced Fluorescence (PLIF)
When: Friday, June 21 @ 10:15 AM – 12:15 PM
Paper #: 92058
Thermal Development of an Impinging Jet Using Planar Laser Induced Fluorescence (PLIF)
When: Friday, June 21 @ 10:15 AM – 12:15 PM
Paper #: 92062